- 01PassVisual and dimensionalØ 117.8 mm · spec ≤ 118.4 mmJacket defects: none
- 02PassPartial discharge1.7 × Uo for 10 minutesMeasured: 4.2 pC · limit ≤ 10 pC
- 03PassAC withstand2.5 × Uo for 30 minutes at 50 HzNo breakdown, no flashover
The Largest Energy Laboratory Complex In The World.
GCC Lab is Saudi Arabia's largest energy testing complex. We qualify, certify, and witness the equipment that builds the Kingdom. 32,000 m squared of class-leading capability.
Capabilities
Fifteen accredited services. Independent. Traceable. Built for the hardest specs in the Kingdom.

Power Testing Complex
HV, MV, LV electrical equipment qualification under IEC/IEEE.

Renewables Services
Solar, wind, and storage testing for utility-scale deployments.

ISO 17065 Product Certification
Accredited certification of products against international schemes.

ISO/IEC 17024 Person Certification
Skill certification for engineers, inspectors, and technicians.

Advanced Testing Services
Materials, NDT, environmental and reliability testing.

Calibration
Traceable calibration across electrical, mechanical, and thermal domains.

Safety & Fire Testing
Fire reaction, resistance, and toxicity testing per ISO/EN.

Technical & Engineering Services
Failure analysis, root cause, and engineering consultancy.

Digitalization & Asset Monitoring
IoT sensing, condition monitoring, and predictive analytics.

R&D and IP Commercialization
Applied research, prototyping, and IP-to-market pipelines.

OT/ICS Cyber Security
Assessment and hardening of OT, ICS, and SCADA environments.

Onsite Testing Unit
Mobile testing capability deployed to client sites.

Energy Innovation Center
Pre-commercial energy-tech validation and pilot programs.

Industrial Compliance Management
Regulatory mapping and end-to-end compliance programs.

Analytical Laboratory
Chemical, oil, and material analysis with traceable methods.
Procedure. And the record.
Every test on our floor follows the same path: a documented procedure, a witnessed run, a signed certificate. Below is an HV cable acceptance test per IEC 60840: the procedure on the left, the certificate we issue on the right.
- 01
Stage 1 · Visual and dimensional
Inspect the cable jacket for surface defects. Verify diameter, conductor cross-section, and screen continuity against the manufacturer drawing.
- 02
Stage 2 · Partial discharge
Energize at 1.7 times rated voltage. Measure partial discharge magnitude at the splice and termination. Pass threshold: 10 picocoulombs.
- 03
Stage 3 · AC withstand
Apply 2.5 times rated voltage for thirty minutes at 50 hertz. No breakdown, no flashover. Report and sign.
Capability matrix.
Real ranges. Real standards. Real accreditation bodies. No marketing words.
Power & Metrology
Switchgear short-circuit
Range100 kA · 3 sVoltage≤ 800 kVStandardSTLIEC 62271-100Power transformer
Range1500 MVA, full typeVoltage≤ 400 kVStandardISO 17025IEC 60076Calibration, electrical
Range0.005% (k = 2)VoltageDC · ACStandardSACISO/IEC 17025
Cables & Insulation
Cable acceptance, HV
Range2.5 Uo · 30 minVoltage36-500 kVStandardISO 17025IEC 60840Partial discharge
Range10 pC, 50 · 60 HzVoltage≤ 400 kVStandardISO 17025IEC 60270
Renewables
PV module qualification
RangeIEC 61215 + 61730Voltage≤ 1500 V DCStandardIECEEIEC 61215Battery storage, BESS
Range5 MWh · cycle testVoltage≤ 1500 V DCStandardISO 17025IEC 62619, UL 9540
Safety & Assurance
Fire reaction & resistance
Range950 °C · 180 minStandardISO 17025ISO 1182, EN 13501OT cyber assessment
RangePurdue L1-L4StandardISO 17021IEC 62443Failure analysis
RangeSEM · EDS · DGAStandardISO 17025ASTM E2014
Audited. Renewed. Re-audited.
Three live ISO certifications, maintained continuously since 2008.



Eleven Saudi shareholders.






















Ship to spec._
Get partnered with our power-testing team. Onboarding starts within two business days.
no spam, audit-grade nda available on request
